Skip to content

How to Configure VLANS for Meraki MX Appliances

How To Configure Virtual Networks Meraki

If you find your network growing and you need to start segmenting users based on physical locations, you may want to start using virtual networks, or VLANs. Here’s a quick setup: Step 1: Enable VLANs by navigating to Security & SD-WAN > Configure > Addressing & VLANs > Deployment Settings > Mode Step 2: Configure…

Read More

Meraki MR32 Cycling and Not Connecting

Meraki Devices

I ran into a problem with an MR32 AP a while back with a client and it took a while to discover the true issue. I was working with a client to install an MX64 with an MR32 AP to provide wireless. Once it came time to install the MR32, the lights kept cycling through…

Read More

Microsoft Teams – Transfer a Call to Someone’s Voicemail

Teams Logo

How to Transfer a Call Directly to a Coworker’s Voicemail Watch this video or use the instructions below to learn how you can use Microsoft Teams to transfer a call directly to a colleague’s voicemail. Full Transcript:  If you field calls for your organization, or if you’re the target of constant spam calls that come…

Read More

Teams Direct Routing TLS and Certificates Pitfalls for SIP Trunks

Teams Direct Routing TLS

Setting up Teams Direct Routing has a couple difficult portions, especially when trying to get the TLS SIP trunk up and responding. After working to get Teams Direct Routing up, here are some of the pitfalls I had to crawl out of. First, we needed to figure out which Certificate Authorities were allowed and that…

Read More